The TURRET data sheet of    BARUFFALDI

Data sheets with 150 dpi 
resolution   
(large files)
TB TS/TOE TSMA TOERR TAN
TOE80 TOE100 BAN MRA/MRR
live tool holder		  

Type: 

Center height mm/inch

# of positions

Weight  kg/lbs

Main characteristics
TOE 80 40/1.57 6 or 8 11/24

Horizontal axis turret

  • Bi-directional with continuous rotation    

  • Turret unlocking without tool holder disc lifting

  • Absolute encoder for position control

  • Proximity switch for locking control

  • Life lubrication of mechanical parts

  • 3 HIRTH coupling system

  • Coolant through the tool holder
TOE 100 50/1.96 8 or 12 20/44
TOE 320 160/6.29 8 or 12 380/836
TOE 400 200/7.87 8 or 12 480/1056

Type: 

Center height mm/inch

# of positions

Weight  kg/lbs

Main characteristics
TS 120 63/2.48 8 or 12 48/106

Horizontal axis turret

  • Bi-directional with continuous rotation    

  • Turret unlocking without tool holder disc lifting

  • Absolute encoder for position control

  • Proximity switch for locking control

  • Life lubrication of mechanical parts

  • 3 HIRTH coupling system

  • Coolant through the tool holder
TS 160 803.15 8 or 12 58/128
TS 200 100/3.93 8 or 12 100/220
TS 250 125/4.92 8 or 12 135/300

Type: 

Center height mm/inch

# of positions

Weight  kg/lbs

Main characteristics
TB 120 63/2.48 8 or 12 44/97

Horizontal axis turret servo driven

  • Turret controlled by servo motor

  • Turret unlocking without tool holder disc lifting

  • Bi-directional with continuous rotation 

  • Life lubrication of mechanical parts

  • 3 HIRTH coupling system

  • Coolant through the tool holder

  • Shock-less positioning

  • Locking/unlocking by pneumatic or hydraulic

 
TB 160 80/3.15 8 or 12 50/110
TB 200 100/3.93 8 or 12 100/220
TB 250 125/4.92 8 or 12 120/264

Type: 

VDI shank

Max.power

kW/HP

Max.RPM

Main characteristics
TSMA 120 20/25 4/5.5 6000

Horizontal axis turret live tool

  • Main characteristic like the standard turret

  • Only the tool in the working position is driven

  • Automatic coupling of the rotating tool during the indexing cycle

  • Every position on the disc can be driven or fixed tool post

  • Pre-loaded multi-teeth Hirth clutch for the coupling of the driven tools

  • Tool disc according  DIN69880 (VDI) 

  • TOERR for sub-spindle machines, VDI pockets are in radial direction

  • Max.power and RPM : at the driving clutch

             

TSMA 160 30 5/6.8 6000
TSMA 200 40 9/12.5 4000
TSMA 250 40/50 12/16.5 4000
TOERR 160 20/25/30 5/6.8 4500
TOERR 200 30/40 9/12.5 3500
TSMA TOERR

Type: 

Center height mm/inch

Size of the VDI tool holder

Weight  kg/lbs

Main characteristics
TAN 120/4 57/2.24 56 17/37.4

Vertical axis turret 

  • Turret can be assembled in any position

  • Positioning without any intermediate stop

  • Simple and safe locking system

  • Large Hirth coupling diameter

  • One single motor controls the indexing, positioning and locking 

  • Tool holders according VDI 3425

 

 

 
TAN 160/4 80/3.15 72 31/68.2
TAN 210/4 100/3.93 90 62/136.4
TAN 265/4-6 125/4.92 115 116/255.2
TAN 340/4-6 160/9.29 140 250/550
TAN 440/4-6 180/7.08 140 430/946

Type: 

Plate height mm/inch

# of positions

Weight  kg/lbs

Main characteristics
BAN 300 145/5.70 4-6-8 300/660

Vertical axis turret 

  • Positioning without any intermediate stop

  • Simple and safe locking system

  • Large Hirth coupling diameter

  • One single motor controls the indexing, positioning and locking 

  • Standard installation on horizontal lathes, where reduced dimensions are required

  • Could be used as a support for the workpiece

 
BAN 400 180/7.08 4-6-8 450/990

BAN 300 turret with 8   position tool holder drum

 

HOME   TURRET   BARUFFALDI